7" Double convoluted airbag
Perfect for Holden VT-VZ other direct bolt in airbag suspension setups.
Weight: 2.5kg
Diameter: 180mm
Max Load: 2600lb
Load Rating @ 100psi : 970.7kg
Stud Size: 3/8" UNC
Air Port Size: 1/2" NPT
16 other products in the same category:
Beautiful blue OR Red display with optional Blue or Red night time display ( Changes due to how you wire see manual supplied for details)
Get rid of your air lines to your gauges and make the...
2 Corner Gauge panel with switches
This gauge panel comes complete with left and right 2 way momentary switches ( up and down) as well as a digital 2 way gauge!
This kit is perfect for controlling...
Air Tank Drain Kit
1/4" Npt Remote Drain 1m Length
This Drain kit allows you to drain the tank in an airbag installation from a remote area if its difficult to get to the bottom of the...
BRASS Male Elbow 90 Degree
NPT Thread
Brass Finish
Male - Male Thread 90 Degree Angle
FeaturesSlam Specialties is proud to release the MC.1-SS. A microprocessor controlled, solid state switch-box and receiver for your air ride control.Compact and lightweight design coupled with...
4 Corner Height Sensor Harness
Direct replacement for Accuair, Levelride and other autolevel system sensor harnesses.
Labelled Sensor plugs
1- Front Left
2- Front Right
3- Rear Left
4- Rear Right...
Get down low as desired with this rear air suspension kit for VT-VZ vehicles.
This Kit comes with 95% of what you need ( missing a few installation accessories such as grommets, split tube,...
Interrupt Rating: 2.5KA@12VDCOperating temp: -40°C to 85°C (-40°F to 185°F)Storage temp: -40°C to 125°C (-40°F to 260°F)Terminal: #10-32 thread with quick connector.Mounting Torque Rating: 15in-lb...
DOT Approved Brass Straight PTC
Male NPT Thread - Push to Connect Tube ( Outside Diameter)
DOT Approved
O Rig Seals
Brass Finish (1/8" NPT- 5/32" ( 4mm) are Nickle finish)
Specifications:
The ASDG2B is a 2-way air pressure gauge that displays the pressures of 2 individual airbags. It is a 52mm (2”) gauge featuring plug and play style connectors with simple...
Get down low as desired with this air suspension kit for VT-VZ vehicles.
This Kit comes with 95% of what you need ( missing a few installation accessories such as grommets, split tube, solder,...
6" Double convoluted airbag
Perfect for Ford BA-FG (with upper plates) and other direct bolt in airbag suspension setups.
Weight: 1.9kg
Diameter: 153 mm
Max Load: 2500lb
Load Rating @ 100psi : 635...
12v Air Compressor - Ideal for Air Suspension
Specifications:
Model: ASAC480B18Voltage: 12vMax Current: 23AMax Working...
Aluminium air tank 5 port 3 Gallon (approx 9 litres)
Tank Size is L450mm x H220mm x W180mm
2x 3/8" NPT Ports on ends
3x 1/4" NPT Ports on 1 end ( See pictures )
Whats included?
1x electric momentary switch
Perfect for use in air suspension with electronic valve setups to activate both inflate and deflate solenoids.
10A Rating 125v
Specifications:
The AS-WSM-HOL-002 is a 9 output “plug n’ play” solution to allow for independent control of 8 airbags using the factory VY VZ master window switch. The control is switched between...
