DOT Approved Brass Straight PTC
Male NPT Thread - Push to Connect Tube ( Outside Diameter)
DOT Approved
O Rig Seals
Brass Finish (1/8" NPT- 5/32" ( 4mm) are Nickle finish)
16 other products in the same category:
2 Corner Gauge panel with switches
This gauge panel comes complete with left and right 2 way momentary switches ( up and down) as well as a digital 2 way gauge!
This kit is perfect for controlling...
Aluminium air tank 5 port 3 Gallon (approx 9 litres)
Tank Size is L450mm x H220mm x W180mm
2x 3/8" NPT Ports on ends
3x 1/4" NPT Ports on 1 end ( See pictures )
6″ diameter bag
Single 1/2″ NPT port
Rated @ 250psi
6061-T6 CNC machined aluminum NPT port
Zinc plated steel threaded inserts
2.7″ min. collapsed height
11″ max. height
Internal bumpstops...
4 Corner Height Sensor Harness
Direct replacement for Accuair, Levelride and other autolevel system sensor harnesses.
Labelled Sensor plugs
1- Front Left
2- Front Right
3- Rear Left
4- Rear Right...
Specifications:
The VBVU4BK is a 4-way 8 solenoid valve block that allows for independent control of 4 airbags. It features dual 1/4” NPT inlet and exhaust ports allowing for multiple install...
Whats included?
1x electric momentary switch
Perfect for use in air suspension with electronic valve setups to activate both inflate and deflate solenoids.
10A Rating 125v
Specifications:
The ASWK-GP3-VU2-5 is a plug and play harness to go from the GP3 series gauge panel to the VBVU2 series valve block. Simply plug in the connector to the valve block and connect the...
FeaturesSlam Specialties is proud to release the MC.1-SS. A microprocessor controlled, solid state switch-box and receiver for your air ride control.Compact and lightweight design coupled with...
6" Double convoluted airbag
Perfect for Ford BA-FG (with upper plates) and other direct bolt in airbag suspension setups.
Weight: 1.9kg
Diameter: 153 mm
Max Load: 2500lb
Load Rating @ 100psi : 635...
DOT Approved Brass Swivel Elbow
Male NPT Thread - Push to Connect Tube ( Outside Diameter)
DOT Approved
O Rig Seals
Brass Finish (1/8" NPT- 5/32" ( 4mm) are Nickle finish)
Auto Drain 1/4" NPT Air Filter / Water Trap
Female NPT Thread - 1/4"
220psi rated 145psi normal working pressure ( Ideal for 150psi pressure switches)
Auto Drain ( When tank pressure gets low or...
Get down low as desired with this rear air suspension kit for VT-VZ vehicles.
This Kit comes with 95% of what you need ( missing a few installation accessories such as grommets, split tube,...
Specifications:
The AS-WSM-HOL-001 is a 9 output “plug n’ play” solution to allow for independent control of 8 airbags using the factory VT VX master window switch. The control is switched...
6mm Clear Acrylic Sensor arm replacement Replace your broken sensor arm with this cnc cut replacement arm Keeps the standard hole spacing and uses your existing screws to mount to sensor
(Sensor...
Finish:
Black and Chrome style finish with Green and Orange Needles
Dimensions:
52mm Mounting Diam
Thread Size: 1/8" NPT Thread
Working Range:
Approximately 0-200PSI
Package Includes: 1x 200 PSI...
2 Corner Gauge panel with switches
This gauge panel comes complete with left and right 2 way momentary switches ( up and down) as well as a digital 2 way gauge!
This kit is perfect for controlling...
