Pressure switches are used to automatically turn a compressor on when the pressure is getting low and off when it reaches its desired level. This is a fixed (non adjustable) pressure switch which can be used in conjunction with a relay to automatically turn your compressor on at approximately 120PSI and off when the pressure is at approximately 150PSI.
- Material: metal
- Color: black
- Size: approx. 45.5*26.7mm
- 1/4" NPT End
- 12 Volt
- Turns On at 120psi, Turns Off at 150psi (Within 10%)
MUST USE A RELAY IN CONJUNCTION WITH THIS PRESSURE SWITCH - CAN NOT BE CONNECTED DIRECTLY TO COMPRESSOR
16 other products in the same category:
Specifications:
The AS-WSM-HOL-002 is a 9 output “plug n’ play” solution to allow for independent control of 8 airbags using the factory VY VZ master window switch. The control is switched between...
Use this fitting to inflate your air suspension system / tank in emergency as well as drain your tank if installed on the bottom port of the tank. Can also be used in load assist configurations to...
Specifications:
The VBVU2BK is a 2-way 4 solenoid valve block that allows for independent control of 2 airbags. It features dual 1/4” NPT inlet and exhaust ports allowing for multiple install...
3 Gallon Steel Air Suspension Tank – Durable & Reliable for Your Air Ride System
Enhance your air suspension system with our 3 Gallon Steel Air Suspension Tank, designed for durability,...
Slimline Dual Pressure Gauge with Blue Display – Precision Monitoring for Your 12V System
Stay in complete control of your vehicle’s pressure levels with our Slimline Dual Pressure Gauge with Blue...
Beautiful blue OR Red display with optional Blue or Red night time display ( Changes due to how you wire see manual supplied for details)
Get rid of your air lines to your gauges and make the...
7" Double convoluted airbag
Perfect for Holden VT-VZ other direct bolt in airbag suspension setups.
Weight: 2.5kg
Diameter: 180mm
Max Load: 2600lb
Load Rating @ 100psi : 970.7kg
Stud Size: 3/8"...
Advanced Air Suspension Control System – Precision Control at Your Fingertips
Take full control of your rear air suspension setup with our Advanced Air Suspension Control System, designed to...
5 Gallon Steel Air Tank – Durable, High-Capacity Air Storage for Air Suspension Systems
Upgrade your air suspension setup with this 5 Gallon Steel Air Tank, designed to deliver high-performance air...
Auto Drain 1/4" NPT Air Filter / Water Trap
Female NPT Thread - 1/4"
217psi rated 145psi normal working pressure ( Ideal for 150psi pressure switches)
Auto Drain (When tank pressure gets low or...
Brass Socket Plug
Male NPT Thread
Brass Finish
Allan Key Drive
Specifications:
The VBVU4BK is a 4-way 8 solenoid valve block that allows for independent control of 4 airbags. It features dual 1/4” NPT inlet and exhaust ports allowing for multiple install...
Interrupt Rating: 2.5KA@12VDCOperating temp: -40°C to 85°C (-40°F to 185°F)Storage temp: -40°C to 125°C (-40°F to 260°F)Terminal: #10-32 thread with quick connector.Mounting Torque Rating: 15in-lb...
Aluminium air tank 5 port 3 Gallon (approx 9 litres)
Tank Size is L450mm x H220mm x W180mm
2x 3/8" NPT Ports on ends
3x 1/4" NPT Ports on 1 end ( See pictures )
4 Corner Height Sensor Harness
Direct replacement for Accuair, Levelride and other autolevel system sensor harnesses.
Labelled Sensor plugs
1- Front Left
2- Front Right
3- Rear Left
4- Rear Right...
4 Corner Height Sensor Harness
Direct replacement for Accuair, Levelride and other autolevel system sensor harnesses.
Labelled Sensor plugs
1- Front Left
2- Front Right
3- Rear Left
4- Rear Right...
