12v Air Compressor - Ideal for Air Suspension
Specifications:
Model: ASAC480B18
Voltage: 12v
Max Current: 23A
Max Working Pressure: 200psi
Flow Rate @0psi (13.8v): 1.8cfm
Duty Cycle: 100% @ 100psi
1/4" NPT Swivel connector and check valve
Black Finish
Includes:
1x ASAC480B18 compressor
Mounting hardware
1x Filter unit
2x spare filters
1x Filter relocation kit with hose
2x Barbed Hose Fittings
1x Blade Style Fuse *
* Highly recommend using a circuit breaker style fuse instead of the blade style fuses. Blade fuses can run hot with high current draw and over time can deteriorate.
16 other products in the same category:
Get down low as desired with this air suspension kit for VT-VZ vehicles.
This Kit comes with 95% of what you need ( missing a few installation accessories such as grommets, split tube, solder,...
Finish:
Black and Chrome style finish with RED LED display
Dimensions:
52mm Mounting Diam
Sender units: 1/8" NPT Thread
Working Range:
Approximately 0-220PSI
Whats included?
1x electric momentary switch
Perfect for use in air suspension with electronic valve setups to activate both inflate and deflate solenoids.
10A Rating 125v
Height Sensor
Suits Accuair New Plug
The AArot120 Height sensors are direct replacements for the Accuair Elevel height sensors as well as other autolevel sensors that use the AA-ROT-120...
Specifications:
The VBVU2BK is a 2-way 4 solenoid valve block that allows for independent control of 2 airbags. It features dual 1/4” NPT inlet and exhaust ports allowing for multiple install...
Pressure switches are used to automatically turn a compressor on when the pressure is getting low and off when it reaches its desired level. This is a fixed (non adjustable) pressure switch which...
Airbrake Line for Air Suspension and Onboard Air Kits
Sold Per MTR
DOT Approved
SAE J844
Brass Socket Plug
Male NPT Thread
Brass Finish
Allan Key Drive
FeaturesSlam Specialties is proud to release the MC.1-SS. A microprocessor controlled, solid state switch-box and receiver for your air ride control.Compact and lightweight design coupled with...
BRASS Bushing
NPT Thread
Brass Finish
Male - Female Thread
These bolt in Spring locators, allow you to install springs back into your vehicle after installing bolt in airbag suspension. Kit includes:
2x Upper Plates
2x Lower plates
4x Upper bolts and...
DOT Approved Brass Swivel Elbow
Male NPT Thread - Push to Connect Tube ( Outside Diameter)
DOT Approved
O Rig Seals
Brass Finish (1/8" NPT- 5/32" ( 4mm) are Nickle finish)
Finish:
Black and Chrome style finish with Green and Orange Needles
Dimensions:
52mm Mounting Diam
Thread Size: 1/8" NPT Thread
Working Range:
Approximately 0-200PSI
Package Includes: 1x 200 PSI...
Bolt in air suspension front strut assemblies
These bags allow for full safe travel compared to some others on the market. Using triple convoluted bags means the full travel can be achieved without...
If you are looking for an entry level control system that is simple while offering smartphone capabilities, the e+ Connect wireless controller is a great choice. This wireless switch box allows...
4 Corner Height Sensor Harness
Direct replacement for Accuair, Levelride and other autolevel system sensor harnesses.
Labelled Sensor plugs
1- Front Left
2- Front Right
3- Rear Left
4- Rear Right...
