Get down low as desired with this rear air suspension kit for BA-FG vehicles.
This Kit comes with 95% of what you need ( missing a few installation accessories such as grommets, split tube, solder, tape etc) to get your vehicle rear bagged!
Included in the kit:
- 3 Gal tank ( as standard)
- 480c Black series compressor
- Compressor wiring kit (7m of 5mm wire + 150psi pressure switch + auto reset breaker + relay)
- Switch panel wiring with compressor killswitch included
- Dual digital gauge and switch panel with compressor killswitch
- All Brass DOT approved fittings
- DX2500 double convoluted air springs with upper bag plates
- 2 way valve block
- 5m of 3/8" Airline for bags
- Slimline digital pressure sender units and wiring
- Water trap and filter
- 1/4" Remote drain kit( Schrader valve style)
- Airbag mounting hardware
- Airbag hole pattern templates
- brief installation diagrams ( NOT FULL INSTRUCTIONS).
This kit assumes you have knowledge on how to install a rear airbag suspension setup to these vehicles it does not include a full detailed how to manual.
16 other products in the same category:
Get down low as desired with this air suspension kit for VT-VZ vehicles.
This Kit comes with 95% of what you need ( missing a few installation accessories such as grommets, split tube, solder,...
Specifications:
The VBVU2BK is a 2-way 4 solenoid valve block that allows for independent control of 2 airbags. It features dual 1/4” NPT inlet and exhaust ports allowing for multiple install...
Brass Socket Plug
Male NPT Thread
Brass Finish
Allan Key Drive
6″ diameter bag
Single 1/2″ NPT port
Rated @ 250psi
6061-T6 CNC machined aluminum NPT port
Zinc plated steel threaded inserts
2.7″ min. collapsed height
11″ max. height
Internal bumpstops...
7" Double convoluted airbag
Perfect for Holden VT-VZ other direct bolt in airbag suspension setups.
Weight: 2.5kg
Diameter: 180mm
Max Load: 2600lb
Load Rating @ 100psi : 970.7kg
Stud Size: 3/8"...
BRASS Hex Coupling
NPT Thread
Brass Finish
Female - Female Thread
4 Corner Height Sensor Harness
Direct replacement for Accuair, Levelride and other autolevel system sensor harnesses.
Labelled Sensor plugs
1- Front Left
2- Front Right
3- Rear Left
4- Rear Right...
Finish:
Black and Chrome style finish with Green and Orange Needles
Dimensions:
52mm Mounting Diam
Thread Size: 1/8" NPT Thread
Working Range:
Approximately 0-200PSI
Package Includes: 1x 200 PSI...
Auto Drain 1/4" NPT Air Filter / Water Trap
Female NPT Thread - 1/4"
217psi rated 145psi normal working pressure ( Ideal for 150psi pressure switches)
Auto Drain (When tank pressure gets low or...
BRASS Male Elbow 90 Degree
NPT Thread
Brass Finish
Male - Male Thread 90 Degree Angle
Brass Straight Hex Nipple
Male NPT Thread -Male NPT Thread
Brass Finish
DOT Approved Brass Straight PTC
Male NPT Thread - Push to Connect Tube ( Outside Diameter)
DOT Approved
O Rig Seals
Brass Finish (1/8" NPT- 5/32" ( 4mm) are Nickle finish)
Aluminium tank 1 Gallon, 3 port silver (approx 3 litres) H130mm x W95mm x L400mm with drain
2x 3/8" NPT Ports
1x 1/4" NPT Drain port
Specifications:
The AS-WSM-HOL-002 is a 9 output “plug n’ play” solution to allow for independent control of 8 airbags using the factory VY VZ master window switch. The control is switched between...
Specifications:
The ASDG2B is a 2-way air pressure gauge that displays the pressures of 2 individual airbags. It is a 52mm (2”) gauge featuring plug and play style connectors with simple...
Colored LED indicates the status of your compressor.
Accuair’s patented TouchPad+ is the latest technology in air suspension management. This touchpad allows you to easily control your air...