Airbrake Line for Air Suspension and Onboard Air Kits
- Sold Per MTR
- DOT Approved
- SAE J844
16 other products in the same category:
Brass Socket Plug
Male NPT Thread
Brass Finish
Allan Key Drive
These bolt in Spring locators, allow you to install springs back into your vehicle after installing bolt in airbag suspension. Kit includes:
2x Upper Plates
2x Lower plates
4x Upper bolts and...
Bolt in air suspension front strut assemblies
These bags allow for full safe travel compared to some others on the market. Using triple convoluted bags means the full travel can be achieved without...
Specifications:
The AS-WSM-HOL-002 is a 9 output “plug n’ play” solution to allow for independent control of 8 airbags using the factory VY VZ master window switch. The control is switched between...
4 Corner Height Sensor Harness
Direct replacement for Accuair, Levelride and other autolevel system sensor harnesses.
Labelled Sensor plugs
1- Front Left
2- Front Right
3- Rear Left
4- Rear Right...
Aluminium tank 1 Gallon, 3 port silver (approx 3 litres) H130mm x W95mm x L400mm with drain
2x 3/8" NPT Ports
1x 1/4" NPT Drain port
DOT Approved Brass Swivel Elbow
Male NPT Thread - Push to Connect Tube ( Outside Diameter)
DOT Approved
O Rig Seals
Brass Finish (1/8" NPT- 5/32" ( 4mm) are Nickle finish)
Air Tank Drain Kit
1/4" Npt Remote Drain 1m Length
This Drain kit allows you to drain the tank in an airbag installation from a remote area if its difficult to get to the bottom of the...
Auto Drain 1/4" NPT Air Filter / Water Trap
Female NPT Thread - 1/4"
217psi rated 145psi normal working pressure ( Ideal for 150psi pressure switches)
Auto Drain ( When tank pressure gets low or...
Aluminium air tank 5 port 3 Gallon (approx 9 litres)
Tank Size is L450mm x H220mm x W180mm
2x 3/8" NPT Ports on ends
3x 1/4" NPT Ports on 1 end ( See pictures )
Finish:
Black and Chrome style finish with RED LED display
Dimensions:
52mm Mounting Diam
Sender units: 1/8" NPT Thread
Working Range:
Approximately 0-220PSI
Colored LED indicates the status of your compressor.
Accuair’s patented TouchPad+ is the latest technology in air suspension management. This touchpad allows you to easily control your air...
Brass Straight Hex Nipple
Male NPT Thread -Male NPT Thread
Brass Finish
Get down low as desired with this air suspension kit for VT-VZ vehicles.
This Kit comes with 95% of what you need ( missing a few installation accessories such as grommets, split tube, solder,...
DOT Approved Brass Straight PTC
Male NPT Thread - Push to Connect Tube ( Outside Diameter)
DOT Approved
O Rig Seals
Brass Finish (1/8" NPT- 5/32" ( 4mm) are Nickle finish)
6″ diameter bag
Single 1/2″ NPT port
Rated @ 250psi
6061-T6 CNC machined aluminum NPT port
Zinc plated steel threaded inserts
2.7″ min. collapsed height
11″ max. height
Internal bumpstops...
