VT VX VY VZ All Round Bolt In Air Suspension Airbag Kit Sedan, Ute, Wagon

Get down low as desired with this air suspension kit for VT-VZ vehicles. 

This Kit comes with 95% of what you need ( missing a few installation accessories such as grommets, split tube, solder, tape etc) to get your vehicle bagged! 

Included in the kit:

• 5 Gal tank ( as standard)
• 480c Black series compressor ( option for dual)
• Compressor wiring kit (7m of 5mm wire + 150psi pressure switch + auto reset breaker + relay)
• Slam MC1 hand controller 
• 2x Dual digital gauges with 52mm holders 
• All Brass DOT approved fittings
• 2x DX2600 double convoluted rear air springs
• 2x triple convoluted bag assemblies on monroe gt sport shocks
• 4 way valve block
• 18m of 3/8" Airline for bags
• Slimline digital pressure sender units and wiring
• Water trap and filter
• 1/4" Remote drain kit(Schrader valve style)
• Airbag mounting hardware
• Airbag hole pattern templates
• brief installation diagrams ( NOT FULL INSTRUCTIONS). 

This kit assumes you have knowledge on how to install an all round bolt in ( with modification) airbag suspension setup to these vehicles it does not include a full detailed how to manual.  

Choose your model based on which sway bar linkage you have. 

VT VX and VY all use straight end sway bar linkages on the strut, VZ uses a 90 degree linkage. This is the only difference between these kits so check your car incase you have aftermarket linkages used. For example a VZ kit can fit a VX if you swap sway bar links to 90 degree ones.

This kit requires drilling out the spot welds on the factory front strut tower cups and bolting the new struts into the vehicle. This is not a simple drop in kit.