Specifications:
The ASWK-GP3-VU2-5 is a plug and play harness to go from the GP3 series gauge panel to the VBVU2 series valve block. Simply plug in the connector to the valve block and connect the spade connectors to the GP3 gauge panel and you are set to go.
Wiring Colours:
Red : Compressor Trigger 12V+
Yellow : (Corner 1) Left Inflate
Green : (Corner 1) Left Deflate
Brown : (Corner 2) Right Deflate
White : (Corner 2) Right Inflate
Black : Ground
Specifications:
Cut the red wires to desired size and crimp on the 2 supplied terminals. The compressor trigger wire 1 connects to the red wire (valve block plug end) and runs to one side of the pressure switch. The other side of pressure switch (using the other supplied red wire) runs to the compressor relay trigger pin (Pin 86).
16 other products in the same category:
Get down low as desired with this rear air suspension kit for BA-FG vehicles.
This Kit comes with 95% of what you need ( missing a few installation accessories such as grommets, split tube,...
6" Double convoluted airbag
Perfect for Ford BA-FG (with upper plates) and other direct bolt in airbag suspension setups.
Weight: 1.9kg
Diameter: 153 mm
Max Load: 2500lb
Load Rating @ 100psi : 635...
DOT Approved Brass Straight PTC
Male NPT Thread - Push to Connect Tube ( Outside Diameter)
DOT Approved
O Rig Seals
Brass Finish (1/8" NPT- 5/32" ( 4mm) are Nickle finish)
BRASS Bushing
NPT Thread
Brass Finish
Male - Female Thread
Colored LED indicates the status of your compressor.
Accuair’s patented TouchPad+ is the latest technology in air suspension management. This touchpad allows you to easily control your air...
DURABLE
Manufactured from durable materials to help ensure longevity.
CERTIFIED PART
This product is a 100% certified AccuAir replacement part.
GUARANTEED FITMENT
AccuAir guarantees...
3 PROGRAMMABLE HEIGHT
Lowered / Ride Height / Raised plus All Down when using e+ Height*
AUTOMATIC CALIBRATION
Learns how to adjust for your vehicle when using e+ Height*
BLUETOOTH
Long...
12v Air Compressor - Ideal for Air Suspension
Specifications:
Model: ASAC480B18Voltage: 12vMax Current: 23AMax Working...
Specifications:
The ASDG2B is a 2-way air pressure gauge that displays the pressures of 2 individual airbags. It is a 52mm (2”) gauge featuring plug and play style connectors with simple...
Auto Drain 1/4" NPT Air Filter / Water Trap
Female NPT Thread - 1/4"
217psi rated 145psi normal working pressure ( Ideal for 150psi pressure switches)
Auto Drain ( When tank pressure gets low or...
2 Corner Gauge panel with switches
This gauge panel comes complete with left and right 2 way momentary switches ( up and down) as well as a digital 2 way gauge!
This kit is perfect for controlling...
7" Double convoluted airbag
Perfect for Holden VT-VZ other direct bolt in airbag suspension setups.
Weight: 2.5kg
Diameter: 180mm
Max Load: 2600lb
Load Rating @ 100psi : 970.7kg
Stud Size: 3/8"...
DOT Approved Brass Swivel Elbow
Male NPT Thread - Push to Connect Tube ( Outside Diameter)
DOT Approved
O Rig Seals
Brass Finish (1/8" NPT- 5/32" ( 4mm) are Nickle finish)
Specifications:
The VBVU2BK is a 2-way 4 solenoid valve block that allows for independent control of 2 airbags. It features dual 1/4” NPT inlet and exhaust ports allowing for multiple install...
If you are looking for an entry level control system that is simple while offering smartphone capabilities, the e+ Connect wireless controller is a great choice. This wireless switch box allows...
BRASS Street Elbows
NPT Thread
Brass Finish
Male - Female Thread