Get down low as desired with this rear air suspension kit for VE-VF vehicles.
This Kit comes with 95% of what you need ( missing a few installation accessories such as grommets, split tube, solder, tape etc) to get your vehicle rear bagged!
Inlcuded in the kit:
- 3 Gal tank ( as standard)
- 480c Black series compressor
- Compressor wiring kit (7m of 5mm wire + 150psi pressure switch + auto reset breaker + relay)
- Switch panel wiring with compressor killswitch included
- Dual digital gauge and switch panel with compressor killswitch
- All Brass DOT approved fittings
- Shockwave rear bolt in bags with laser cut tops
- 2 way valve block
- 6m of 3/8" Airline for bags
- Slimline digital pressure sender units and wiring
- Water trap and filter
- 1/4" Remote drain kit( Schrader valve style)
- Airbag mounting hardware
- Brief installation diagrams ( NOT FULL INSTRUCTIONS).
This kit assumes you have knowledge on how to install a rear airbag suspension setup to these vehicles it does not include a full detailed how to manual.
16 other products in the same category:
4 Corner Height Sensor Harness
Direct replacement for Accuair, Levelride and other autolevel system sensor harnesses.
Labelled Sensor plugs
1- Front Left
2- Front Right
3- Rear Left
4- Rear Right...
FeaturesSlam Specialties is proud to release the MC.1-SS. A microprocessor controlled, solid state switch-box and receiver for your air ride control.Compact and lightweight design coupled with...
BRASS Bushing
NPT Thread
Brass Finish
Male - Female Thread
Auto Drain 1/4" NPT Air Filter / Water Trap
Female NPT Thread - 1/4"
220psi rated 145psi normal working pressure ( Ideal for 150psi pressure switches)
Auto Drain ( When tank pressure gets low or...
Get down low as desired with this air suspension kit for VT-VZ vehicles.
This Kit comes with 95% of what you need ( missing a few installation accessories such as grommets, split tube, solder,...
Interrupt Rating: 2.5KA@12VDCOperating temp: -40°C to 85°C (-40°F to 185°F)Storage temp: -40°C to 125°C (-40°F to 260°F)Terminal: #10-32 thread with quick connector.Mounting Torque Rating: 15in-lb...
DURABLE
Manufactured from durable materials to help ensure longevity.
CERTIFIED PART
This product is a 100% certified AccuAir replacement part.
GUARANTEED FITMENT
AccuAir guarantees...
These bolt in Spring locators, allow you to install springs back into your vehicle after installing bolt in airbag suspension. Kit includes:
2x Lower plates
2x Lower bolts
2x Weld in nuts
**...
6″ diameter bag
Single 1/2″ NPT port
Rated @ 250psi
6061-T6 CNC machined aluminum NPT port
Zinc plated steel threaded inserts
2.7″ min. collapsed height
11″ max. height
Internal bumpstops...
Whats included?
1x electric momentary switch
Perfect for use in air suspension with electronic valve setups to activate both inflate and deflate solenoids.
10A Rating 125v
Airbrake Line for Air Suspension and Onboard Air Kits
Sold Per MTR
DOT Approved
SAE J844
Specifications:
The AS-WSM-HOL-001 is a 9 output “plug n’ play” solution to allow for independent control of 8 airbags using the factory VT VX master window switch. The control is switched...
Brass Socket Plug
Male NPT Thread
Brass Finish
Allan Key Drive
Height Sensor
Suits Accuair New Plug
The AArot120 Height sensors are direct replacements for the Accuair Elevel height sensors as well as other autolevel sensors that use the AA-ROT-120...
4 Corner Height Sensor Harness
Direct replacement for Accuair, Levelride and other autolevel system sensor harnesses.
Labelled Sensor plugs
1- Front Left
2- Front Right
3- Rear Left
4- Rear Right...
If you are looking for an entry level control system that is simple while offering smartphone capabilities, the e+ Connect wireless controller is a great choice. This wireless switch box allows...