- Out-of-Stock
PX2 Ranger Loaded 10" Sub box
Custom made Subwoofer Enclosure made to fit the PX2 Ford Ranger. Fits behind the rear seats on RHS with cutout made for the hinge and factory lower bracket. Modifications Required: The brackets...
Hertz DBX 25.3 Dieci 10" Loaded Subwoofer Enclosure
The DBX 25.3 car audio subwoofer box is designed to enhance the audio system performance in the low range frequencies, optimizing the spaces and ensuring a quick, not too invasive installation.
The subwoofer unit, which is the DS sub, provides a punching, dynamic, surrounding bass. The very thick MDF enclosure, thanks to its rigid and stable structure, doesn’t affect the acoustics. The rear slanted panel fulfils two important functions: it reduces back-wave reflections and eases the installation.
Size mm (in.) | 250 (10) |
Power Handling - Peak W | 600 |
Power Handling - Continuous W | 150 |
Impedance Ω | 4 |
Frequency response Hz | 32 ÷ 400 |
Sensitivity dB SPL | 89 |
Voice coil Ø mm (in.) | 38 (1.5) |
Xmax mm | 9 |
X-mech mm (in.) | 16 (0.63) |
Re Ω | 3,3 |
Fs Hz | 36 |
Vas l | 34 |
Qts | 0,92 |
Qes | 1,13 |
Qms | 5 |
Spl dB | 89 |
7 other products in the same category:
Custom made Subwoofer Enclosure made to fit the PX2 Ford Ranger. Fits behind the rear seats on RHS with cutout made for the hinge and factory lower bracket. Modifications Required: The brackets...
MTX Audio has been the market leader in Subwoofer technology since 1979 and proudly invented the first ever mobile audio enclosure in 1984! This Bass solution will impress even the most avid...
The strong MDF enclosure makes sure that the triple RT10 subwoofers will perform to their maximum capacity! This subwoofer system fits where others don't without sacrificing output and sound...
APSBFRBT Constructed from 4mm fiberglass with a double layer front baffle, this enclosure is suitable for 10” subwoofers with a 150mm maximum mounting depth. Simple to install, the enclosure...
THUNDER1000.1 The MTX Audio THUNDER1000.1 is designed to work with an assortment of subwoofers and is capable of delivering up to 1000 watts RMS in an incredibly small package. This wailin'...
Constructed from 4mm fiberglass with a double layer front baffle, this enclosure is suitable for 10” subwoofers with a 150mm maximum mounting depth. Simple to install, the enclosure secures...
Kenwood 10"/25cm Class D Powered Subwoofer- Designed for the spare tyre well 15"" or above- Remote Controller included Maximum Output Power1200W Woofer Unit10inch (25cm) Single Voice CoilRubber...