The Aerpro APP016 is a Primary Harness designed to suit various Holden vehicles. It allows for the installation of an aftermarket headunit without the need to remove the factory wiring plug from the vehicle. APP016 converts the factory headunit plug in the vehicle into a universal double ISO connector system. For simple plug and play headunit installation, add an Aerpro APP8 Secondary Headunit harness to suit your new aftermarket headunit and the two looms will connect together via the ISO connector system.
- Please Note:
- Harnesses vary between vehicle models, to find the correct harness for your vehicle, use the Aerpro Vehicle Selector.
- Depending on the vehicle and aftermarket headunit, installation may not be completely plug and play, a small amount of hard-wiring may still be required to complete the installation.
Features:
- Designed for quick, simple and precise aftermarket headunit wiring installation
- Vehicle specific plug designed to connect directly into the vehicles original headunit wiring loom, no need to remove the factory plug
- Converts vehicle specific plug to universal ISO connector system
- Provides a Plug & Play installation solution for aftermarket headunits when paired with an Aerpro APP8 Secondary Harness (some hard-wiring may still be required)
- Secure Clips on ISO connectors to ensure secure and long lasting connection
- Suits various Holden Vehicles
Specs:
- HARNESS TYPE: PRIMARY HARNESS
- PLUG TYPE: VEHICLE SPECIFIC
- CONNECTION TYPE: UNIVERSAL ISO SOCKET (FEMALE TYPE)
- NOTES:
- Suits various Holden Vehicles.
- When paired with Aerpro APP8 Series Secondary Harness plug and play solution a small amount of hardwired installation may still be required depending on the vehicle and aftermarket headunit type.
Vehicles known to work with this product:
9 other products in the same category:
Factory plug to aftermarket speakers
Plug and Play
Locking Clip
Sold in Pairs
Vehicles known to work with this product:
Holden Barina 2005-2008 TK Hatch
Holden Barina 2006-2011 TK...
The Aerpro CHTO2C Steering Wheel Control Interface (SWC) allows you to upgrade to an aftermarket headunit whilst maintaining use of your factory steering wheel controls. Engineered to suit...
The Aerpro APP0113 is a Primary Harness designed to suit various Citroen, Mitsubishi & Peugeot vehicles. It allows for the installation of an aftermarket headunit without the need to...
Factory plug to aftermarket speakers
Plug and Play
Locking Clip
Sold in Pairs
Vehicles known to work with this product:
Holden Barina 2005-2008 TK Hatch
Holden Barina 2006-2011 TK...
The Aerpro APP0130 is a Primary Harness designed to suit various Holden & Suzuki vehicles. It allows for the installation of an aftermarket headunit without the need to remove the factory...
The T Harness interfaces between the vehicles factory radio and the vehicles wiring. It intercepts the speaker, power and ground wires in the vehicle, allowing the 'plug and play' installation of...
The Aerpro APP0130 is a Primary Harness designed to suit various Holden & Suzuki vehicles. It allows for the installation of an aftermarket headunit without the need to remove the factory...
The Aerpro APP0111 is a Primary Harness designed to suit various Mitsubishi vehicles with single plug connector. It allows for the installation of an aftermarket headunit without the need to...
The Aerpro APP0120 is a Primary Harness designed to suit various Nissan vehicles with small two plug connectors. It allows for the installation of an aftermarket headunit without the need to...
Holden Captiva 7 2006-2015 CG Series 1 & 2
Holden Barina 2008-2011 TK Hatch
Holden Barina 2006-2011 TK Sedan
Holden Epica 2007-2011 EP
