CHTO2C Steering wheel control interface to suit Toyota

$106.00
Inc GST

The Aerpro CHTO2C Steering Wheel Control Interface (SWC) allows you to upgrade to an aftermarket headunit whilst maintaining use of your factory steering wheel controls. Engineered to suit various Toyota vehicles with Fujitsu Ten or Matsushita original headunits and 20 pin connector, the steering wheel control interface includes a harness that is fitted with a vehicle specific plug designed to connect directly into the existing wiring in the vehicle with ease, no cutting of the factory wiring harness in the vehicle is required. Installation of the aftermarket headunit is simplified even further when paired with the optional Aerpro APP9 Headunit Secondary ISO Harness & SWC Patch Lead, which connects between the aftermarket headunit and the Aerpro Steering Wheel Control Interface.

  • Please Note:
    • Steering Wheel Control Interfaces vary between models, to find the correct part for your vehicle use the Aerpro Vehicle Selector.
    • A Steering Wheel Control Patch Lead is required to be used in conjunction with this part to enable Steering Wheel Controls to function (sold separately).
    • Aftermarket headunit must be SWC compatible and Steering Wheel Control Functions may vary from the OEM Functions.
    • Compatible with listed vehicles that have Fujitsu Ten or Matsushita original headunits and 20 pin connector.
    • Not compatible with factory OEM amplified or factory upgraded systems.
Features: 
  • Allows you to upgrade to an aftermarket headunit whilst maintaining use of your factory steering wheel controls
  • Increases driver safety by allowing you to keep your hands on the steering wheel and eyes on the road
  • Compatible with listed vehicles that have Fujitsu Ten or Matsushita original headunits and 20 pin connector
  • Not compatible with factory OEM amplified or factory upgraded systems
  • Fitted with a vehicle specific plug, no cutting of wires required
  • To simplify installation, this interface is compatible with Aerpro APP9 aftermarket headunit harness adapter with SWC patch lead
  • Requires SWC patch lead (available separately) to provide compatibility with the aftermarket headunit
Specs: 
  • INTERFACE TYPE: ANALOGUE
  • PATCH LEAD TYPE: C
  • PHONE BUTTON COMPATIBILITY: NO
  • VOICE ASSISTANT BUTTON SUPPORT: NO
  • OUTPUTS:
    • REVERSE TRIGGER: NO
    • PARK BRAKE: NO
    • SPEED PULSE: NO
    • ILLUMINATION: NO
    • AMP REMOTE: NO
    • TELEPHONE MUTE: NO
  • OTHER RETENTION:
    • OEM AMPLIFIED SYSTEM: NO
  • NOTES:
    • Steering Wheel Control Interfaces vary between models, to find the correct part for your vehicle use the Aerpro Vehicle Selector.
    • A Steering Wheel Control Patch Lead is required to be used in conjunction with this part to enable Steering Wheel Controls to function (sold separately).
    • Aftermarket headunit must be SWC compatible and Steering Wheel Control Functions may vary from the OEM Functions.
    • Compatible with listed vehicles that have Fujitsu Ten or Matsushita original headunits and 20 pin connector.
    • Not compatible with factory OEM amplified or factory upgraded systems.

Weight: 

0.10KG
HideManuals & Firmware

Manuals: 

9 other products in the same category: