The MTX Audio THUNDER1000.1 is designed to work with an assortment of subwoofers and is capable of delivering up to 1000 watts RMS in an incredibly small package.
This wailin' amp features a high efficiency class D topology. This type of circuit is preferred for driving subwoofers due to its ability to minimize power loss to heat when you rock all night long.
- 600 watts RMS x 1 at 2 ohms
- 1,000 watts RMS x 1 at 1 ohm
- variable low-pass filter (40-220 Hz, 12 dB/octave)
- selectable bass boost (0, 6, 12 dB at 50 Hz)
- variable subsonic filter (10-50 Hz, 12 dB/octave)
- frequency response: 10-220 Hz
- preamplified inputs
- 4-gauge power and ground leads recommended
- 12-7/8"W x 2-3/16"H x 5-9/16"D
RT12-04 Subwoofers
The looks of this entry level sub tell exactly what’s in store! Powerful Accurate Bass at an unbelievable price point. This woofer shines when used in a sealed enclosure and causes a small earthquake when used in a vented enclosure.
Features :
- ALDS Technology
- SPV Technology
- Spider with interlaced tinsel leads
- Original MTX steel frame
- One piece Polypropylene cone
- Butyl rubber surround
- Ø50 mm high temp (220°) aluminium voice coil
- High-end, heavy duty terminals designed by Streetwires
Tech Specs ( PER SUB)
| Frequency Response |
27Hz - 150Hz |
| RMS Power (Watts) |
250 |
| Peak Power (Watts) |
500 |
| Recommended Amp Power (RMS) |
125 - 300 |
| Sensitivity |
86.4dB |
| Voice Coil |
2" (5.08 cm) |
| Magnet Weight |
47 oz. |
| Mounting Depth |
5.187" (13.17 cm) |
| Cut Out Diameter |
10.812" (27.46 cm) |
| Sealed Enclosure Net Volume |
1 cu ft |
| Vented Enclosure Net Volume |
2.25 cu ft |
What's Included:
- 1x THUNDER1000.1 Mono Blockamplifier and accessories
- 1x Pair of RT12-04 12" Subwoofers
5 other products in the same category:
MTX Audio has been the market leader in Subwoofer technology since 1979 and proudly invented the first ever mobile audio enclosure in 1984! This Bass solution will impress even the most avid...
Constructed from 4mm fiberglass with a double layer front baffle, this enclosure is suitable for 10” subwoofers with a 150mm maximum mounting depth. Simple to install, the enclosure secures...
APSBFRBT
Constructed from 4mm fiberglass with a double layer front baffle, this enclosure is suitable for 10” subwoofers with a 150mm maximum mounting depth. Simple to install, the enclosure...
Custom made Subwoofer Enclosure made to fit the PX2 Ford Ranger. Fits behind the rear seats on RHS with cutout made for the hinge and factory lower bracket.
Modifications Required:
The brackets...
The DBX 25.3 car audio subwoofer box is designed to enhance the audio system performance in the low range frequencies, optimizing the spaces and ensuring a quick, not too invasive installation.The...
