Air suspension components for sale
Best sellers
An electric wire ferrule (sometimes end terminal) is a metal tube crimped over stranded wire to secure the strands within a screw terminal. Electrical insulation is included to protect any exposed...
These ring terminals allow you to secure your wire to a specific point with an 8mm bolt. These are widely used in the automotive industry allowing for multiple wires to connect to a single...
These bolt in Spring locators, allow you to install springs back into your vehicle after installing bolt in airbag suspension. Kit includes: 2x Upper Plates 2x Lower plates 4x Upper bolts and...
DOT Approved Brass Swivel Elbow Male NPT Thread - Push to Connect Tube ( Outside Diameter) DOT Approved O Rig Seals Brass Finish (1/8" NPT- 5/32" ( 4mm) are Nickle finish)
Active filters
Aluminium tank 1 Gallon, 3 port silver (approx 3 litres) H130mm x W95mm x L400mm with drain 2x 3/8" NPT Ports 1x 1/4" NPT Drain port
DOT Approved Brass Swivel Elbow Male NPT Thread - Push to Connect Tube ( Outside Diameter) DOT Approved O Rig Seals Brass Finish (1/8" NPT- 5/32" ( 4mm) are Nickle finish)
Finish: Black and Chrome style finish with RED LED display Dimensions: 52mm Mounting Diam Sender units: 1/8" NPT Thread Working Range: Approximately 0-220PSI
Height Sensor Suits Accuair New Plug The AArot120 Height sensors are direct replacements for the Accuair Elevel height sensors as well as other autolevel sensors that use the AA-ROT-120...
Air Tank Drain Kit 1/4" Npt Remote Drain 1m Length This Drain kit allows you to drain the tank in an airbag installation from a remote area if its difficult to get to the bottom of the...
Specifications: The VBVU4BK is a 4-way 8 solenoid valve block that allows for independent control of 4 airbags. It features dual 1/4” NPT inlet and exhaust ports allowing for multiple install...
7" Double convoluted airbag Perfect for Holden VT-VZ other direct bolt in airbag suspension setups. Weight: 2.5kg Diameter: 180mm Max Load: 2600lb Load Rating @ 100psi : 970.7kg Stud Size: 3/8"...
DOT Approved Brass Straight PTC Male NPT Thread - Push to Connect Tube ( Outside Diameter) DOT Approved O Rig Seals Brass Finish (1/8" NPT- 5/32" ( 4mm) are Nickle finish)
Pressure switches are used to automatically turn a compressor on when the pressure is getting low and off when it reaches its desired level. This is a fixed (non adjustable) pressure switch which...
Specifications: The VBVU2BK is a 2-way 4 solenoid valve block that allows for independent control of 2 airbags. It features dual 1/4” NPT inlet and exhaust ports allowing for multiple install...
Airbrake Line for Air Suspension and Onboard Air Kits Sold Per MTR DOT Approved SAE J844
Brass Socket Plug Male NPT Thread Brass Finish Allan Key Drive
