You wouldn't put a KTM 125 motor in a Panzer VIII Maus Army tank and expect it to work well, So why buy high end speakers and run them off sub-level equipment that can't deliver the power? Get the power to your audio equipment that is deserves!
Best sellers
An electric wire ferrule (sometimes end terminal) is a metal tube crimped over stranded wire to secure the strands within a screw terminal. Electrical insulation is included to protect any exposed...
These ring terminals allow you to secure your wire to a specific point with an 8mm bolt. These are widely used in the automotive industry allowing for multiple wires to connect to a single...
These bolt in Spring locators, allow you to install springs back into your vehicle after installing bolt in airbag suspension. Kit includes: 2x Upper Plates 2x Lower plates 4x Upper bolts and...
DOT Approved Brass Swivel Elbow Male NPT Thread - Push to Connect Tube ( Outside Diameter) DOT Approved O Rig Seals Brass Finish (1/8" NPT- 5/32" ( 4mm) are Nickle finish)
Active filters
Advanced Class-D 4-channel amplifier technology with asymmetrical power distribution. Amplifier power at 4 ohms RMS (2 x 45 W + 2 x 80 W). High-level input & low-level input, integrated...
MICRO 120.2 - The new power amplifier in micro format. Small, practical, strong. The new MICRO 120.2 impresses in numbers, 110 x 80 x 42 mm! Minimum dimensions and maximum power at the same time!...
400 Watts of Maximum Power Output 300 Watts × 1 Continuous @ 2-Ohms 200 Watts × 1 Continuous @ 4-Ohms Double Side Conformal Coated PCB Assembly MOS-FET Power Supply 12dB/Oct. Low Pass Electronic...
400 Watts of Maximum Power Output 50 Watts × 4 Continuous @ 4-Ohms 75 Watts × 4 Continuous @ 2-Ohms 150 Watts × 2 Continuous @ 4-Ohms Bridged Double Side Conformal Coated PCB Assembly MOS-FET...
HCP 4D is a D Class car audio amplifier, able to offer up to 1160W (Peak); it is the ideal choice for those who want high power levels in complex systems. Extremely versatile, complete in its...
Designed for Kickin' Four Channel Sound The THUNDER 75.4 car amplifier features a class A/B design to provide the highest sound quality to any style full range speaker. Class A/B topology is...
Rated Continuous (RMS) Power @ 14.4 V Topology Class AB + Class D 4Ω stereo, ≦1% THD+N 80W RMS x4 +250W RMSx1 2Ω stereo, ≦1% THD+N 110W RMS x4 +380W RMSx1 4Ω Bridged, ≦1% THD+N 210W RMS X2...
The MTX Audio THUNDER1000.1 is designed to work with an assortment of subwoofers and is capable of delivering up to 1000 watts RMS in an incredibly small package. This wailin' amp features a high...
RAGE 2500.1 Circuit configuration: HI-EF Class D Frequency response: 15 HZ-200 HZ Signal to noise ratio: >85 DB Input sensitivity: 4 V-0.1V Crossover circuit: 24 DB/OCT Hight pass crossover:...
Excellent for OEM systems upgrade, the Hertz DPower4 four channels car audio amplifiers is ultra-compact to ensure effortless installations in the increasingly narrow spaces of modern vehicles or...
Rated Continuous (RMS) Power @ 14.4 V 4Ω , ≦1% THD+N 700W RMS X1 2Ω , ≦1% THD+N 1300W RMS X1 1Ω , ≦1% THD+N 2000W RMS X1 General Specifications Frequency Response 10HZ~220HZ(-3dB) S/N Ratio @...
The MTX Audio TX Series is a brand new premium range of amplifiers designed in the USA and made with high quality MOSFET technology, with high output and fantastic sound quality at a great price...
